A240 316 stainless steel sheet belongs to austenitic chromium-nickel stainless steel. A240 316 stainless steel sheet can be used for pressure vessels. ASTM A240 specification covers chromium, chromium-nickel, and chromium-manganese-nickel stainless steel plate, sheet, and strip for pressure vessels and for general applications including architectural, building, construction, and aesthetic applications. This specification is one of the most common specifications for 300 series and 400 series stainless steel sheet.

ASTM A240 316 Stainless Steel Sheet Properties
Available Sizes:
Thickness: 0.4mm-14mm
Width: 800mm-2,000mm
Mechanical Properties at Room Temperature
Properties: Typical
Ultimate Tensile Strength: 75 KSI min (515 MPA min)
Yield Strength: (0.2% Offset) 30 KSI min (205 MPA min)
Elongation: 40% min
Hardness: Rb 95 max
Properties: Tempered
1/16H
Ultimate Tensile Strength: 85 KSI min (585 MPa min)
Yield Strength: (0.2% Offset) 45 KSI min (310 MPA min)
Elongation: 35% min
1/8H
Ultimate Tensile Strength: 100 KSI min (690 MPa min)
Yield Strength: (0.2% Offset) 55 KSI min (380 MPa min)
Elongation: 25% min
1/4H
Ultimate Tensile Strength: 125 KSI min (860 MPa min)
Yield Strength: (0.2% Offset) 75 KSI min (515 MPA min)
Elongation: 10% min
Tempered:
316 can be rolled to achieve the temper properties required by specific customers and/or manufacturing requirements.
If you are interested in A240 316 stainless steel sheets chemical composition and A240 316 stainless steel sheet properties, please feel free to contact Bebon. Email: sales3@bebonchina.com

Copyright @2011 by Henan BEBON international co.,ltd. All rights reserved
Tel: 0086-371-86151827 86151627Fax: 0086-371-86011881E-mail: sales7@bebonchina.com